My CartView CartCheckout

My Cart

Items:  items
Value: 
View CartCheckout

Universal Water Based Epoxy Coating

Universal Water Based Epoxy Coating 5lt

Universal Water Based Epoxy Coating 5lt


Price: 58.29 (69.95 Including VAT at 20%)

Universal Water Based Epoxy Coating is a simple to use water based epoxy coating that is suitable for most applications where concrete or masonry require waterproofing or a protective coating. It is easy to apply and no more difficult to use than a conventional emulsion paint but can even be applied to damp substrates. Once cured you are left with a tough, non toxic, waterproof and easy to maintain finish.

Suitable Applications:
  • As a waterproof membrane to prevent rising damp in floors.
  • As a general purpose waterproofing treatment and decorative finish for any brick, concrete,masonry and cement surface.
  • As a coating for damp surfaces where adhesion would be an issue for other coatings.
  • For sealing asbestos based materials.
  • For waterproofing basements and cellars
  • For sealing recently laid concrete floors to allow the rapid laying of flooring such as tiles or boards.
  • As a tank or bund lining for protection against mild chemicals
  • As a hard wearing floor coating for garages and workshops
  • As a primer for our Epoxy Floor Paint when a high quality finish is required.
Typical Areas of Use:
  • Basements and cellars
  • Food manufacturing and storage
  • Garages and workshops
  • Dairies, milking parlours and breweries
  • Abattoirs and fisheries

Coverage:

Approximately 6 - 7 m² per litre per coat. Coverage can vary significantly depending on the porosity and condition of the substrate.

Colours:

Available from stock in clear, white, black and light grey. Other colours are available to order. Please see our Epoxy Floor Paint for a wider range of colours.

Size:

Available only as a two part product that when mixed and combined with cold water gives 5 litres.

Application:

Universal water based epoxy is designed to be a two part system but where the surface is very porous or when being used as a damp proof membrane a third coat is recommended. When applying to a porous substrate we recommend diluting the first coat by an additional 10% with clean cold water to help with coverage.

Please Note:

Water based epoxy must only be applied when the ambient and substrate temperature is above 10°C and should not be stored below 5°C. Because the pot life is approximately 1 -2 hours a separate tin will be required for each coat.

Produxt Datasheet