International Thinners

Special Brush/Roller Flowing Thinner for Perfection Pro and Toplac Plus.

Thinner No.1 is suitable for thinning and/or equipment cleaning in association with: 1-Pack Paints and Varnishes - Yacht Primer, Toplac®, PreKote, Interdeck®, Danboline, Original, Goldspar®, Goldspar Satin, Schooner®, Schooner Gold, Compass, Intertuf® 16.

Thinner No.3 is suitable for thinning Antifoulings, Bottom Coatings and other Special Paints.

Thinner No.7 is suitable for thinning and/or equipment cleaning in association with: Interprotect® and Gelshield® 200. Suitable for equipment cleaning only in association with Interfill 830, Interfill 833 and Gelshield® Plus.

Thinners No 7 is an idea wipe down solvent for use in final surface prep. The blend of solvents will remove all wax, polymer and silicone residues.

Thinner No.9 is suitable for thinning and/or equipment cleaning in association with: Perfection® Varnish, Perfection, Perfection Undercoat.

Thinner 910 (previously known as Thinner No.10) is suitable for thinning and/or equipment cleaning in association with: Perfection and Perfection Undercoat by conventional spray. Also suitable for spraying Toplac, Clear Wood Sealer Fast and International Varnishes.

VC General Thinner is formulated to thin all VC products where necessary and clean application equipment. It will also re-dissolve VC 17m and can be used to

remove VC 17m if required.

This product is a blend of organic solvents specifically designed for thinning and/or equipment cleaning in association with Interspray 900, Interprime 880, Interprime 820 and Polyurethane Basecoat (not available in North America) for applications by spray. Use for spray applications in the approximate temperature range: 10-15°C. Thinner 910 can be blended to facilitate spraying over a range of temperatures for optimum results.

International Thinners YTA925 - Extra Slow Spray Solvent Typical temperature range solvent should be used in: 22-35°C.

International Thinners YTA920 - Slow Spray Solvent Typical temperature range solvent should be used in: 15-22°C.

International Thinners TA915 - Standard Spray Solvent Typical temperature range solvent should be used in: 10-15°C.

Thinners for International Antifoulings and Interprime 198.

Thinner No.1 is suitable for thinning and/or equipment cleaning in association with: 1-Pack Paints and Varnishes - Yacht Primer, Toplac®, PreKote, Interdeck®, Danboline, Original, Goldspar®, Goldspar Satin, Schooner®, Schooner Gold, Compass and Intertuf® 16.

Thinner for epoxy based compositions.

General purpose cleaner and gun wash.