We are processing and shipping online orders as fast as possible.
We cannot currently process orders over the phone, but please feel free to contact us at email@example.com
Awlgrip Reducers (Thinners)
AwlGrip T0001 Topcoat Spray Reducer can only be used with AWLGRIP and AWLCRAFT 2000 in a spraying application when a fast drying time is desired.
Use AwlGrip T0001 in AWLGRIP®/AWLCRAFT® 2000 Topcoats when application and cure temperatures are between 60°F to 70°F (16°C to 21°C) and 80°F to 90°F (27°C to 32°C). At 60°F to 70°F (16°C to 21°C), T0001 will keep the paint film open for good flow but evaporate fast enough to provide adequate dry and dust-free times. At higher temperatures, the solvency of T0001 helps maximize atomization. Its fast evaporation rate allows the solvent to exit the film before skinning occurs, avoiding solvent entrapment or solvent "pop"
T0001 is usually used in Awlgrip and Awlcraft 2000 Topcoats. T0001 is also recommended for use in Quik-Grip Primer.
T0003 Standard Reducer for Spray Applied Urethane Topcoats
Use T0003 in AWLGRIP®/AWLCRAFT® 2000 Topcoats when application and cure temperatures are between 70°F to 85°F (21°C to 29°C).This is the one most commonly used in the UK.
T0101 Awlstar Gold Label Anti-Fouling T0101 is specially formulated for spray and brush/roll applications of Awlstar Gold Label Anti-Fouling. It should not be used in urethane or epoxy coatings.
Awlgrip T0005 is a Hot Weather Reducer/Retarder use to reduce AWLGRIP® Topcoats and improve flow and leveling when application and cure temperatures are above 85°F.
Activator/Reducer for AWL-BRITE® PLUS J3005/J3006/A0031
A0031 is a special blend of solvents and additives which is a required part of the AWL-BRITE® PLUS mix.
A0031 contains additives which stabilize the pot life of the mixture and initiate cure of the product..
AwlGrip T1006 Epoxy Primer Reducer is a primer reducer, a standard epoxy reducer for spray application of 545 Primer, Awl-Quik, sprayable fairing compound, 30-y-94, and high build epoxy primer. Also recommended for Hullgard Epoxy Primer.
T0031 Brushing reducer to be used when brushing or rolling 545 Primer or AWL-QUIK® Primer.T0031 Brushing Reducer for Epoxy Primers and Urethane Topcoats.T0031 is not recommended for use in spray applications.
If a retarder reducer is needed for spray application, T0005 should be used.
T0073 Special reducer for ULTRA-BUILD® Primer (D8008-D3018)