My CartView CartCheckout

My Cart

Items:  items
Value: 
View CartCheckout

Awlcraft 2000 Topcoat

Awlgrip Awlcraft 2000 Topcoat

Awlgrip Awlcraft 2000 Topcoat


Awlcraft 2000 is widely regarded as the ultimate super yacht quality topside gloss finish.

Two pack acrylic urethane coating with long lasting gloss and colour retention.

Wide colour range available in US Quart or Gallon pack sizes for professional spray application only.

Coverage: 118m2 per Gallon mixed kit (Gallon Base + two Quarts AWLCAT #2 Converter + 1.5 Quarts Spray Reducer) per coat at recommended Wet Film Thickness: 50-75 microns. 3 or more Coats recommended.

Reducer: (Thinner): Hot Weather, Standard, Fast or Very Fast versions available depending on ambient temperature.

VOC: Base: 472.5 g/lt or 3.9 lbs/gallon

Spray Converter (G3010) 591g/lt or 4.9 lbs/gallon

Intended Use: Professional Only

Flamable LiquidCarcinogenSkin, eye and Respiratory tract irritant

Product Datasheet

Awlcraft 2000 Topcoat Quart

Awlcraft 2000 Topcoat Quart



Usage Confirmation:
This product will be used or applied by a professional?


Prices from £89.53 + vat depending on colour.

Estimated lead time from order 3-4 days depending on colour.

Awlcraft 2000 Topcoat Gallon

Awlcraft 2000 Topcoat Gallon



Usage Confirmation:
This product will be used or applied by a professional?


Prices from £265.03 + vat depending on colour.

Estimated lead time from order 3-4 days depending on colour.

AWLCAT #2 Standard Converter G3010

AWLCAT #2 Standard Converter G3010



Usage Confirmation:
This product will be used or applied by a professional?


G3010 AWL-CAT® #2 Standard Topcoat Converter for Spray Application.

Awlgrip G3010 AwlCat #2 Converter is to be used with Awlgrip when spraying only or with AwlCraft 2000.

Spray: Mix by volume one part Awlgrip Topcoat Base Component with one part Awlcat #2/G3010 Spray Converter to a smooth,homogenous mixture. Reducer addition level required to achieve 14 seconds viscosity (DIN4 or equivalent) varies color to colour.

For standard conventional spray application this can be attained by adding up to 25% reducer (thinners) using the correct spray reducer(s) appropriate for conditions. For example, if a 25% reduction is used, overall mix is 1:1:½ by volume (8 oz. Base, 8 oz. G3010, 4 oz.

Reducer). Clear coats and painting in high temperature conditions may require additional reduction.

MSDS

Awlgrip T0001 Fast Spray Reducer

Awlgrip T0001 Fast Spray Reducer



Usage Confirmation:
This product will be used or applied by a professional?


AwlGrip T0001 Topcoat Spray Reducer can only be used with AWLGRIP and AWLCRAFT 2000 in a spraying application when a fast drying time is desired.

Use AwlGrip T0001 in AWLGRIP®/AWLCRAFT® 2000 Topcoats when application and cure temperatures are between 60°F to 70°F (16°C to 21°C) and 80°F to 90°F (27°C to 32°C). At 60°F to 70°F (16°C to 21°C), T0001 will keep the paint film open for good flow but evaporate fast enough to provide adequate dry and dust-free times. At higher temperatures, the solvency of T0001 helps maximize atomization. Its fast evaporation rate allows the solvent to exit the film before skinning occurs, avoiding solvent entrapment or solvent "pop"

T0001 is usually used in Awlgrip and Awlcraft 2000 Topcoats. T0001 is also recommended for use in Quik-Grip Primer.