Protectakote and Safekote

Protectakote is a tough, one-part polyurethane with self-contained recycled rubber granules, which give it an attractive tough-textured appearance. When exposed to atmospheric moisture, Protectakote undergoes a chemical curing process which changes it from a liquid to a tough polyurethane membrane.

Protectakote will chemically bond to most clean and dry surfaces. These include, but are not limited to, concrete, wood, fibreglass, metal, rubber and sound-painted materials. It can be applied by roller, brush or spray. Protectakote can give a relatively smooth or rough surface, depending on application technique.

Total coverage: About 1m²/ litre applied in two coats

SafeKote is a single-component polyurethane coating incorporating uniform silica beads that provide an attractive, low profile and slip-resistant surface for wet or dry walkways which is easy to clean and maintain. Its moisture-cure aliphatic polyurethane composition provides ease of application with an extremely abrasion and weather resistant film suitable for marine applications. SafeKote has an attractive, low gloss finish which is easy to clean.

SafeKote comes in attractive standard colours including transparent that will not fade or yellow from UV radiation, although safety colours and other colours are available on request.

Protecta-Kote Primers - the range of primers designed to be used with Protectakote

To get the best out of Protectakote it needs to be applied with a textured roller and only the solvent Xylene can be used with it. Below are a range of rollers, brushes, gloves etc for using with Protectakote.