Skippers Anti Osmosis Epoxy Treatment

Two-component, high-build epoxy primer with anti-osmosis properties

High-build epoxy satin coating for all types of surfaces. The advantage to build up a thickness of 100-150 dry microns per coat allows sensible reduction of labour costs. Overcoatable with chlorinated rubber, epoxy or polyurethane coatings for high quality long lasting anticorrosive coating systems. Excellent as anti-osmosis pre-treatment on fibreglass boats. Provides outstanding chemical resistance in the marine environment, both in atmosphere or immersion conditions.

Two-component, high-build epoxy primer with anti-osmosis properties

High-build epoxy satin coating for all types of surfaces. The advantage to build up a thickness of 100-150 dry microns per coat allows sensible reduction of labour costs. Overcoatable with chlorinated rubber, epoxy or polyurethane coatings for high quality long lasting anticorrosive coating systems. Excellent as anti-osmosis pre-treatment on fibreglass boats. Provides outstanding chemical resistance in the marine environment, both in atmosphere or immersion conditions.

Waterproofing, anti-osmosis two component primer

Two-component epoxy coating performing excellent adhesion, waterproofing and mechanical characteristics such as flexibility and long term resistance. It may even glue surfaces which are not perfectly dry. Used for anti-osmosis treatment in fibreglass boat bottom. EPOSEALER 97 can be applied both on an appearently sound gelcoat or after that the faulty gelcoat has been removed completely. Also applied as anticorrosive primer for metal (cast iron and light alloys parts etc.). It is also used for gluing purposes (e.g. wood to wood, wood to fibreglass etc.). Used also for restoring old wooden boats, EPOSEALER 97 is absorbed by the grains in the wood conferring adequate waterproofing and mechanical resistance; for repairing purposes when used in combination with fibre sheets etc.