Skippers Unifiber Primer is a one component fibreglass primer

Skippers Unifiber Primer is for direct application onto fibreglass boat bottoms and as a keying coat applied at low thickness. Recommended also as intermediate coat between epoxy and polyurethane two-component products and one-component finishes. Overcoatable with SKIPPER ENAMEL for topside and superstructure finish or with appropriate antifouling paint.

APPLICATION: Brush, Roller, Spray

DILUTION: brush, roller: 0-5% Thinner 600; spray: 10-20% Thinner 600

DRYING TIMES: touch dry: 20-30 minutes; recoat time: min. 6 hours

TH.COVERAGE: 10 m2/Lt for 15 dry microns

<p> </font>

</div>>!!