My CartView CartCheckout

My Cart

Items:  items
Value: 
View CartCheckout

Coppershield 2000

Coppershield 2000 Antifouling

Coppershield 2000 Antifouling


Coppershield 2000 is a controlled water soluble epoxy based antifouling system which, when applied correctly, offers up to eight seasons protection without the requirement of re-applying.

The soluble nature removes the need for the regular abrading required with some copper in resin systems.

The packs contain 500gm of Resin, 500gm of Hardener (1:1 mix ratio) and 2kg of blown Copper Powder.

Three coats must be applied on to a primer coat of West System 105 epoxy to achieve the best results.

Coppershield 2000 Pack Contents:

1.2 Litre MI/COPBOT/3 (0.5kg Resin + 0.5kg Hardener)

2kg Pure copper powder

Coverage 10-12m2 per pack

Please Note: Product is now discontiuned.

Redtree Deluxe Mohair Mint Green

Redtree Deluxe Mohair Mint Green

Redtree Deluxe Mohair Paint rollers have a 3/16 nap and solvent resistent phenolic core. Mohair Mint paint rollers work well with high quality enamels, varnishes, gloss paints and epoxy primers.

Core Diameter is 1-1/2 for use with Redtree Birdcage handles.

Core: Solvent Resistant Phenolic

Size

Redtree Birdcage Roller Frame

Redtree Birdcage Roller Frame

High quality, light weight roller. Four pressure wires hold the roller head securely in place until the job’s done. For use with Dynex, Foam and Mohair covers.

Design: 4 Wire - 1/4"Shank

Handle: Deluxe Plastic Threaded


West System Epoxy 105 Resin

West System Epoxy 105 Resin

105 Resin is the base material of the WEST SYSTEM family of epoxy products. A clear, pale yellow, low-viscosity liquid epoxy resin, formulated for use with WEST SYSTEM hardeners.

  • Wide cure temperature range with excellent moisture resistance.
  • Wet out and bond on wood fiber, fiberglass, reinforcing fabrics and a variety of metals.
  • Excellent adhesive with or without WEST SYSTEM filler additive
  • No strong solvent odor; safer to work with than polyesters.

Viscosity is approximately 1000 cP (centipoise) at 72°F (22°C).


West System User Manual

West System 205 Fast Hardener

West System 205 Fast Hardener

205 Fast Hardener is a medium-viscosity epoxy curing agent.

It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature.

When mixed with the 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties.

Not intended for clear coating.

Mix Ratio, Resin:Hardener 5:1*

Pot life at 72°F (22°C) 9 to 12 minutes

Cure to a solid state 6 to 8 hours

Cure to maximum strength 1 to 4 days

Minimum recommended temperature 40°F (4°C)

Pumps required 301, 306 or 309


West System 206 Slow Hardener

West System 206 Slow Hardener

206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures.

When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties.

Not intended for clear coating.

Mix Ratio, Resin:Hardener 5:1*

Pot life at 72°F (22°C) 20 to 25 minutes

Cure to a solid state 9 to 12 hours

Cure to maximum strength 1 to 4 days

Minimum recommended temperature 60°F (16°C)

Pumps required 301, 306 or 309