206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures.

When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties.

Not intended for clear coating.

Mix Ratio, Resin:Hardener 5:1*

Pot life at 72°F (22°C) 20 to 25 minutes

Cure to a solid state 9 to 12 hours

Cure to maximum strength 1 to 4 days

Minimum recommended temperature 60°F (16°C)

Pumps required 301, 306 or 309