Skippers Epofond AM9 is a two component epoxy coating. A satin epoxy paint for steel, aluminium, light alloys, fibreglass, cement and wood surfaces.

Recommended as a primer or undercoat in the marine industry but also widely applied on floors, tanks and industrial plants containing or in contact with oils,naphta,kerosene and soda solutions as well as for the internal coating of potable water, performing a non toxic resistant film.

Used as a primer can be overcoated with chlorinated, acrilyc or polyurethane coatings, providing strong adhesion base and long effective anticorrosive barrier. Certified by the Italian Health Authority for contact with drinking water.

Application: Brush-Roller-Spray
Mixing ratio A+B by volume: 4 parts Sol.A with 1 Sol.B
Mixing ratio A+B by weight: 100 parts Sol.A with 20 Sol.B
Pot life A+B (20°C): use within 6-8 hours
Brush-Roller: 10-15% Thinner 765
Spray: 15-25% Thinner 765
Touch dry: 2 h (20°C)
Recoat time: 12-24 h (20°C)
Application temperature: Between +10 C and +40 C
Relevant humidity: Less than 80%
Dry film thickness advised: 50 microns per coat
Theoret. coverage m²/Lt: 8-9 (5-6 m²/Kg)

Product Datasheet