My CartView CartCheckout

My Cart

Items:  items
Value: 
View CartCheckout

Seajet 130 Polyurethane Gloss Varnish

Seajet 130 Polyurethane Gloss Varnish (Two Pack)

Seajet 130 Polyurethane Gloss Varnish (Two Pack)

Seajet Polyurethane Gloss Varnish is a high gloss, very hard two component varnish.

TECHNICAL DATA

Type: Two-component polyurethane based on unsaturated polyesters.

Recommended use: As a varnish for plywoods, saloon tables, cabin soles and epoxy coated wood. Can be used on interior and exterior areas,

Surface Preparation:Surface in poor condition: Remove old varnish layers by sanding or stripping.

Existing 2-component varnish in good condition: Clean with SEAJET THINNER P.

Flatten back with P60-80 abrasive paper along the grain.

Then sand with abrasive paper for P100-220. Clean the surface with a tack rag.

Apply a minimum of five coats of SEAJET POLYURETHANE GLOSS VARNISH.

Add 10-15% thinner for the first two coats. Then reduce thinning to 0-10% for further coats.

Sand between coats with P280-P400 for a better finish.

Clean the surface with a tack rag. Apply with a good quality bristle brush.

Avoid painting varnish when damp or in direct sunlight. Dry mornings are best.

Mix thoroughly by weight in the ratio of 2 of base to 1 of hardener and stir well before use.

Theoretical Coverage between: 16.5 to 12.5 sqm per litre

* In case of brush or roller application more layers may be required to achieve the specified film thickness.

The amount of thinner to be added depends on temperature of the paint and the substrate to be painted.

Application by a short hair mohair or foam roller suited for polyurethanes, followed by brushing out to a

smooth paint film with a soft long haired, good quality brush gives the best possible results.

Seajet 130 Polyurethane Gloss Varnish (Two Pack) 1 litre

Seajet 130 Polyurethane Gloss Varnish (Two Pack) 1 litre


Price: 41.04 (49.25 Including VAT at 20%)