A two pack epoxy zinc phosphate primer for the protection of steel hulls above the waterline.

Designed for spray application to blasted steel in pre and post fabrication stages.

Can be used as a maintenance primer for mechanically cleaned steel in exposed and aggressive environments

• Superior performance to single pack products with much longer coating life
• Excellent impact and abrasion resistance
• Water impermeable and chemically resistant
• Designed as part of the Rylard ‘Premium’ two pack system for canal boats for optimum cost/benefit ratio
• Overcoat with Rylard Premium Enamel two pack finish

For professional use only.

Airless Spray: Output fluid pressure at tip 1500-2200 psi min, Tip Size 11-17 thou (0.28-0.43 mm)

Conventional spray: thin up to 5%, 50-60psi pressure and 1.4-2.0mm fluid tip

Brush and roller application should only be used for small touch-up areas.

Product discontinued.

Product Data Sheets