My CartView CartCheckout

My Cart

Items:  items
Value: 
View CartCheckout

Reactive Resins Safeguard TC

Safeguard TC Tie-Coat Primer

Safeguard TC Tie-Coat Primer

SAFEGUARD TC is a low viscosity, two component epoxy tie coat developed for use as a primer for SYNERGY antifouling. It is also ideal for use where excellent adhesion of subsequent coatings or fillers is required.

SAFEGUARD TC can applied to new, uncured epoxy coatings or to old coatings and GRP.

  • Excellent adhesion to virtually all uncured, or prepared old substrates
  • Matt finish can be over-coated at any time
  • Easy to apply in thin coats
  • Can be used during long coating procedures to provide a brake and thus avoid abrading before coating continues.

APPLICATION

SAFEGUARD TC can be applied by any method. Short pile mohair rollers provide an excellent finish. Foam rollers are unsuitable.

If the substrate is unacceptably rough a coat of EASY FAIR SEU can be applied first and sanded smooth.

OVER-COATING Safeguard TC can be over-coated with Synergy antifouling or most other coatings at any time after the minimum over-coating time.

Type: Solvent born epoxy coating

Coverage: 8m2 per litre per coat

Mix Ratio: 100 parts base to 16 parts hardener

Solvent: Synsol 100 Epoxy Solvent

Colour: Grey

Product Datasheet