My CartView CartCheckout

My Cart

Items:  items
Value: 
View CartCheckout

Reactive Resins Armourguard PW

Reactive Resins Armourguard PW

Reactive Resins Armourguard PW

ARMOURGUARD PW has been developed for coating potable water tanks. It is sufficiently flexible to cope with the expansion and contraction of steel tanks caused by extremes of temperature.

Its resin and hardener components are formulated with materials that are approved for contact with potable water. ARMOURGUARD PW’s superb barrier properties prevent oxygen and moisture reaching the surface of the substrate.

  • Excellent adhesion to most substrates
  • Virtually impervious to moisture vapour
  • Totally solvent free

    For best results apply over ARMOURGUARD ST Primer.

    Armourguard PW can be applied in temperatures between 12ºC and 40ºC.

    Supplied with Syamin 1058 Fast Hardener for best allround performance.

    Coverage of approximately 8m² per litre.

    Please note: This product is no longer available.

    Please see alternative and compatible product below.

    Product Datasheet

Epicol Solvent Free Epoxy Water Tank Coating

Epicol Solvent Free Epoxy Water Tank Coating


Spencer Coatings two pack solvent free epoxy coating, cured with a fast setting amine. Developed for use in leisure marine potable water tanks and industrial site water fittings.

Should be applied by brush or roller onto degreased and freshly blasted or mechanically prepared bright steel. Two full coats are required for potable water situations.

  • Solvent free
  • Blue - Gloss finish
  • Approved to BS6920: Part 1: 2000, WRAS approval
Theoretical Coverage: 2-8m2/litre
Touch Dry in 8hrs, Hard Dry in 24hrs at 10°C

Certification/Approvals: BS6920: Part 1: 2000 "Specification" - Complying with the requirements for Water Regulations Advisory Scheme tests on water quality and is suitable for use with cold water.

WRAS Water Fittings Directory Reference 1207547.

Self-levelling properties make it suitable also as a floor coating.

Product Datasheet