Nautix Primers

P1 Adhesion Primer is a single pot primer suitable for improving the adhesion of subsequent layers on bare and clean GRP surfaces. One coat is sufficient for adhesion.

PE Epoxy primer is a high performance epoxy primer providing outstanding impact and high abrasion resistance qualities. It adheres perfectly on polyester, metallic and wood surfaces.

It also ensures a better adhesion of paint (especially antifoulings).

Applying 3 to 5 coats builds a watertight barrier for osmosis prevention of GRP surfaces.For use with a spray gun.

Nautix HPE is a high build epoxy primer providing outstanding impact and high abrasion resistance.

Nautix PO is a one-pot polyurethane resin, which hardens by reacting with moisture in the air.

Applied onto a hull in multi-coats (4), it highly reinforces the watertightness of gelcoat and is a very efficient osmosis prevention system.

Adhesion promoter for epoxy coatings over metal surfaces.

Nautix Acralu is an etch primer for pre treatment of aluminium, galvanized steel, zinc, bronze and lead.

IA - PA: High efficient one-pot anti-corrosion polyurethane system formulated with Desmodur® E resin, especially recommended for keel treatment.

IA + PA anti-corrosion system is made of a pore-plugged impregnation paint: IA with a protection paint: PA. Both are one-pot polyurethane paint, formulated with a resin base which hardens by reacting with moisture in the air.

This system ensures a long term protection of metallic surfaces againts corrosion in a marine environment, particularly with iron keels.