Nautix PERFORMER is a self-polishing copper-based antifouling paint especially recommended for professional use. Performer antifouling is very thick and can be applied in one coat.

This product is not suitable for aluminium hull. Performer can be applied over most other antifouling paints.

Protection: Nautix epoxy primer HPE or PE (4-5 coats minimum - sand with paper grade 150 between coats and before antifouling application).

Anti-corrosion primer for keel or steel boat: Nautix IA + PA - 1 pack polyurethane resin system.

· 2 coats of Performer are recommended.

· At 15°C : wait 3 hours between 2 coats and 3 hours before launching

· 10 m²/Ltr per coat

· Packing: 5 L - 20 L

· Thinner: Nautix DA - Max: 10 %

· Application methods: brush, roller, spray gun.

**** Update. As of 1st October 2016 - this product has been discontinued by Nautix ****

Suggested alternative: International Uni Pro EU.

Data Sheet