A two component, low VOC, high solids, modified epoxy barrier coat designed to give long term protection in a single coat application. Will continue to cure when immersed in water and has excellent cathodic disbondment resistance.

As a one or two coat system which can be applied directly to mechanically prepared shop primer or grit blasted, hydroblasted or mechanically cleaned surfaces.

PRODUCT INFORMATION.

Colour: Black, White, range available via the Chromascan System.

Finish/Sheen: Gloss

Part B (Curing Agent): EAA964 (included with all 5 & 20lt kits)

Volume Solids: 85% ±2% (ISO 3233:1998)

Mix Ratio: 4 volume(s) Part A to 1 volume(s) Part

Typical Film Thickness: 175 - 350 microns dry (206 - 412 microns wet)

Theoretical Coverage: 4.85 m²/litre at 175 microns dft, allow appropriate loss factors

Method of Application: Airless Spray, Brush, Roller

Flash Point (Typical): Part A 30°C; Part B 58°C; Mixed 33°C

Induction Period: Not required.

Product Datasheet

International RAL colour chart