My CartView CartCheckout

My Cart

Items:  items
Value: 
View CartCheckout

Epifanes Polyurethane Clear Gloss

Epifanes Polyurethane Clear Gloss 750ml

Epifanes Polyurethane Clear Gloss 750ml


Price: 33.48 (40.18 Including VAT at 20%)


Epifanes Polyurethane Clear Gloss Varnish gives an extraordinarily hard finish with a deep clear gloss.

Exceptional U.V. protection for extended freedom from maintenance.

Suitable for all wood types as a complete scheme or as a finish coat over epoxy resin.

  • Superior flow and levelling properties
  • Can be polished when fully cured.
  • Built in UV filters
  • Hard scratch resistant finish

Recoat: 24-48hrs at 20deg C

Coverage: 12 m 2 / kg @ 35 microns

Intended Use: DIY and Professional Use.


Flammable Liquid


Product Datasheet

Epifanes Polyurethane Brush Thinner

Epifanes Polyurethane Brush Thinner


Brushing thinner for Epifanes polyurethane paints and varnishes.

Polyurethane Thinner for Brush is added at a ratio of 5 - 10% by volume to extend the wet-edge and flow time as temperature or wind conditions dictate.

Polyurethane Thinner for Brush is also suitable for brush and tool clean-up.

Intended Use: DIY & Professional

Pyrophoric liquids, category 1 MSDS

Epifanes Polyurethane Spray Thinner

Epifanes Polyurethane Spray Thinner



Usage Confirmation:
This product will be used or applied by a professional?


Quick drying thinner for spray application of Epifanes polyurethane paints and varnishes. Epifanes Polyurethane Thinner for Spray helps the surface flash faster thereby reducing the risk of sags and runs.

Also suitable as a surface degreaser.

Suitable PPE must be worn during use.

Intended Use: Professional Only.

Pyrophoric liquids, category 1, Respiratory tract irritation
MSDS.

3M 734 Wetordry Abrasive Sheet

3M 734 Wetordry Abrasive Sheet

230 x 280 Sheet

600ml Clear Calibrated Mixing Cups

600ml Clear Calibrated Mixing Cups


Crystal clear, solvent resistant and graduated in ml (50-550) with marked levels for two pack product mixing ratios 2:1 (Perfection) 3:1 (Perfection Undercoat etc.) and 4:1 (Durepox, Epoxy resins), plus graduations for adding thinner/reducer percentages.

Essential for accurate mixing of 2K coatings and resins.