My CartView CartCheckout

My Cart

Items:  items
Value: 
View CartCheckout

Durepox DTM Gloss Finish

Durepox DTM Primer/Gloss Finish White

Durepox DTM Primer/Gloss Finish White



Durepox Direct to Metal DTM can be applied directly over suitably prepared G.R.P. (Fibreglass), Carbon Fibre, plain and galvanised steel.

Ideal solution for a easy to apply, single product renovation product on tired GRP surfaces. Adheres well to clean abraded gelcoat to give a tough, abrasion resistant high gloss finish without the need for undercoats and separate primers.

Also suitable for Aluminium after cleaning pre-treatment and etch priming.

Durepox DTM requires a 4:1 mix ratio of base to reactor (hardener) and also needs to be reduced according to application specific conditions.

4lt Base requires 1lt Durepox Hardener.

1lt Base requires 0.25lt Durepox Hardener.


Product Datasheet

Durepox Hardener

Durepox Hardener


Durepox Reactor, or Hardener, is a clear colourless aliphatic polyisocyanate resin solution used as the hardener component for Durepox 2K Primer and Durepox High Performance Clear base components. This hardener is designed to reduce critical recoat time, increase dry time and improve chemical resistance.

Durepox requires a 4:1 mix ratio of base to reactor and also needs to be reduced according to application specific conditions.

Durepox 400 Reducer Slow

Durepox 400 Reducer Slow

R400 Slow Reducer is specifically design for use with roller or brush application. Use a 4:1:2 (base:hardener:reducer) thinning ratio to aid levelling and flow out.

Size

Durepox 400 Reducer Normal

Durepox 400 Reducer Normal

For use with professional, conventional air spray application.

Size