Paint and varnish on high gloss surface

PROPERTIES

Cleans old painted surfaces and leaves a thin film before recoating.

Allows paints to stick to any smooth non-porous surface. Avoids sanding.

May be painted over anytime after 2 hours or up to 7 days later.

Easy to use.

Will not damage old coatings.

WHERE TO USE

Lacquers, baked enamels, varnishes, paint : walls, furniture, radiators...

Ceramics : bathroom

Melamine : kitchen furniture

Glass

Reduces surface preparation time.

Do not overcoat with 2 pack finishes, cellulose, xylene and urethane coatings .

RECOMMENDATIONS BEFORE APPLICATION

Ensure new finish is compatible with the old finish

Remove any loose and flaking old finish

For greasy, waxed or varnished surfaces, scrub surface with a green scourer or 00 steel wool soaked with ESP. Wipe off all ESP after 5-10 minutes then follow application instructions below.

Wipe up ESP before drying. Use clean clothes and change them regularly.

Do not contaminate new clean ESP with old used ESP.

Do not use ESP for dipping

APPLICATION

Apply a liberal application of ESP

Leave to stand 5 minutes then lightly wipe over the surface in one direction with a clean cloth to remove excess ESP.

Allow ESP to dry for 2 hours, before applying the finish.

Coverage when diluted : 15 m²/l

Application tools : Brush, roller, rag, spay.

Application temperature : 5°C to +35°C

Recoating time : 2h to 7 days.

Clean-Up: Water + soap

Data Sheets