Follow us on Twitter

Sign Up Today for our Newsletter!

* required

*







*






ActinicPayments

Join the boatpaint affiliate scheme available to maritime organisations

Custom Search

Blakes
Data
MSDS
Buy
Handbooks and guide specs  
How to paint glassfibre    
How to paint varnish    
How to paint a keel    
How to paint a narrowboat. Excellent Guide!    
Data Sheets
       
BLAKES ANTI-SLIP PEARLS are small hollow glass beads. For mixing or sprinkling onto a wet coating of BLAKES DECK PAINT, BLAKES POLYGLOSS or BLAKES YACHT ENAMEL and other areas where an anti-slip surface is required.
BLAKES BILGE & LOCKER PAINT is a high opacity satin topcoat providing excellent durability, with good water and oil resistance for bilges and lockers. Not suitable for permanent immersion.Area of use Bilges and lockers
BLAKES BLAST PRIMER 15300/ HEMPADUR PRIMER 15300 is a two-component polyamide-cured epoxy primer containing zinc phosphate as corrosion inhibiting pigment. It cures to a strong and rust-preventing coating. Area of use As a primer or intermediate coat in container systems. May be used as a general purpose epoxy primer according to painting specification.  
BLAKES BRILLIANT ENAMEL is an urethane alkyd enamel with high gloss and good colour retention. Flexible and resistant to salt water and spillage of mineral oil. Area of use Above the waterline
BLAKES BROADS antifouling is a medium strength copper based antifouling, for use in both fresh and salt waters. Area of use For use below the waterline.
BLAKES HEMPEL’S CLASSIC BASIC 76111 is a traditional antifouling (soluble matrix) based on cuprous oxide. It changes to final colour after approximately 1 week of exposure to water.  
BLAKES CLASSIC VARNISH is a n air-drying, clear alkyd varnish with tung oil. It has good resistance to seawater, sunlight and adverse weather conditions. Area of use Interior and exterior, above the waterline.
BLAKES CRUISING PERFORMER is a erodible antifouling which is formulated to give optimum performance in all cruising areas.Area of use For use below the waterline.
BLAKES DECK COATING, a durable non-gloss coating for deck areas, which is easy to apply straight onto all substrates - no primer necessary. Add Anti-Slip Granules to the final coat for a non-slip finish.Area of use As a topcoat on decks and walkways.
BLAKES DEGREASER is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two component epoxy products. It has better cleaning properties than epoxy thinners. Area of use For cleaning of brushes, paint rollers, spray equipment and other tools which have been used for mixing or application of BLAKES PAINTS products. v
BLAKES DIAMOND VARNISH is a clear non-yellowing two-component polyurethane varnish. It gives a durable, mirrorlike finish, resistant to weathering. Area of use Above the waterline
BLAKES DIAMOND VARNISH Curing agent MSDS    
BLAKES DURA-GLOSS VARNISH is a quick-drying, clear urethane alkyd varnish. It has good resistance to seawater, sunlight and adverse weather conditions. Area of use For use above the waterline.
BLAKES DURA-SATIN VARNISH is a quick-drying, silk gloss urethane alkyd varnish. It has good resistance to seawater, sunlight and adverse weather conditions. The quality is related to BLAKES DURA-GLOSS VARNISH but with a silk gloss finish. Area of use Above the waterline
BLAKES EPOXY FILLER is a two component, solvent free epoxy filler which, when fully cured, is resistant to water, aliphatic hydrocarbons and related products. Area of use As a filler for metals, hardwood, ferrocement, glass fibre and other rigid materials. On large surfaces especially suited for smooth filling. For filling of minor pinholes in weldings, cavities in propellers, keels and similar. Repair of osmosis damage in glass fibre reinforced polyester hulls
BLAKES EPOXY PRIMER UNDERCOAT is a two component epoxy high build paint. It forms a hard and tough coating resistant to water and petroleum products. Area of use Below and above the water line
BLAKES EPOXY PRIMER UNDERCOAT application instruction    
BLAKES EPOXY PRIMER UNDERCOAT Curing Agent MSDS    
BLAKES FAVOURITE VARNISH is an air-drying, clear urethane alkyd varnish. It has good resistance to seawater, sunlight and adverse weather conditions. Area of use For use above the waterline
BLAKES GELPROTECT SFE200 35651 is a two component amine adduct cured solvent-free epoxy high build primer. It forms a hard, tough and water resistant coating. Area of use Below the waterline
BLAKES GELPROTECT SFE200 35651 Curing Agent MSDS    
BLAKES GLIDE SPEED Exceptionally strong and hard antifouling containing TecCelTM for a smoother surface with reduced friction. Area of use For use below the waterline
BLAKES GLIDE SPEED MSDS for Dark Blue, the one above is for the Red.    
BLAKES GREY METALLIC PRIMER is a conventional primer, containing aluminium flakes which gives excellent water repelling properties. Durable and flexible for use on all substrates, under a conventional paint system. Area of use For use above the waterline.
BLAKES HARD RACING antifouling is a high strength burnishable antifouling especially for power boats , racing yachts and vessels moored in a mud berth and may be used on vessels that are dry sailed.Area of use For use below the waterline
BLAKES HARD RACING White Data Sheet & MSDS  
BLAKES HEMPADUR 15130 is a two-component, polyamide cured coal tar epoxy which provides a very hardwearing coating, highly resistant to seawater and mineral oils. Limitedresistance to a number of solvents. Aliphatic hydrocarbons may be discoloured.  
BLAKES HEMPADUR 45143 High temperatures: 45141 with CURING AGENT 97820 Low to medium temperatures: 45143 with CURING AGENT 97430 HEMPADUR 45141/45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. It is selfpriming and forms a hard and tough coating which has good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products. Harmless to grain cargoes.Area of use 1. As a high build primer, intermediate and/or finishing coat in (heavy duty) paint systems according to specification. (As a finishing coat where a cosmetic appearance is of less importance). 2. For repair and maintenance work at application temperatures above -10°C/14°F on hatch covers, decks, in cargo holds, etc. 3. As a ballast tank coating. HEMPADUR 45143 is intended for use in cold/temperate climates, HEMPADUR 45141 for warmer climates.  
BLAKES HEMPADUR 45143 Application Instructions    
BLAKES KEEL PRIME is a fast drying, anticorrosive primer, especially formulated for use on keels. Overcoating time can be as low as 3 hours, allowing a complete system to be applied in 1 day.Area of use Keels
BLAKES MAST CARE is a silicone and acid free oil which will clean unpainted aluminium and stainless steel masts, wires and deck fittings and will leave a long lasting protective layer.Area of use For use above the waterline
BLAKES MILLE DRIVE is a spray coat for the protection of propellers and outdrives.Area of use For use below the waterline
BLAKES MULTICOAT is a high opacity satin topcoat and primer, providing excellent durability, ideal for all areas above the waterline where a semi-gloss durable topcoat is required. lt can also be used as a complete coating system onto new or bare wood.Area of use As a topcoat on decks and walkways
BLAKES OCEAN PERFORMER is a 2 component ultimate strength erodible antifouling, benefiting from the performance of an enhancing booster additive. This product will give you the ultimate in antifouling performance, in all areas, throughout the season. Area of use For use below the waterline
BLAKES POLYGLOSS is a two pack polyurethane topcoat, giving a high gloss finish which is extremely durable and resistant to UV degradation and abrasion. It is well known for its ease of use and high performance properties.Area of use For use above the waterline.
BLAKES POLYGLOSS Curing Agent MSDS    
BLAKES HEMPEL PROFILLER35370 HEMPEL’S ProFiller 35370 is a two-component, lightweight solvent-free epoxy filler. When fully cured it is resistant to water, aliphatic hydrocarbons and related products. Can be applied in thick coats up to 10-12 mm for a uniform film build.Area of use As a filler and fairing compound, especially suitable for profiling large areas and detailed fairing where structural strength is important. It can be used on most primed rigid substrates, above and below the waterline  
BLAKES YACHT PRIMER UNDERCOAT is a quick drying, high opacity primer and undercoat providing excellent durability and surface stability in preparation for overcoating with single pack systems.Area of use For use above the waterline.
BLAKES/HEMPEL PROP PRIMER Anticorrosive primer and tie coat for different substrates in spray form. Recommended as a primer in the antifouling application for propellers and out board engines for yachts. Area of use Propellers & outboards
BLAKES SEATECH ANTIFOULING is a high strength copper based, waterborne antifouling which provides excellent protection in most fouling conditions.Area of use For use below the waterline

 

BLAKES SEATECH GLOSS VARNISH is a waterbourne, polyurethane varnish, offering a durable high gloss clear finish with high resistance to saltwater and UV damage. Excellent for internal areas as there is no solvent odour during application. Area of use For use above the waterline.
BLAKES SEATECH SATIN VARNISH is a waterborne, polyurethane varnish, offering a durable silk/matt finish with high resistance to saltwater and UV damage. Excellent for internal areas as there is no solvent odour during application.Area of use For use above the waterline
BLAKES SEATECH PRIMER is a waterborne two component polyamine cured epoxy primer.Area of use As a tie coat for waterborne antifoulings
BLAKES SURFACE CLEANER is a concentrated alkaline cleaner based on emulsifiers, surface-active agents and water.Area of use For cleaning and degreasing of painted surfaces before recoating. Especially suited for removal of dirt, soot and uv light degraded surface-layers. Suited for use in high pressure cleaning equipment
BLAKES TEAK CLEANER is a cleaning powder for teak. Harmless to glass fibre, painted or varnished surfaces. Avoid contact with stainless steel.Area of use For cleaning of teak. Especially suited for large areas like decks.
BLAKES TEAK COLOUR RESTORER is a pigmented oil based wood preservative containing antimould agents. After application a golden colour of the wood is obtained.Area of use For use above the waterline. Not for deck areas.
BLAKES TEAK OIL is based on alkyd resin with natural oils which offers good penetration into the wood and high resistance to weather the marine environment. May be used to overcoat Teak Colour Restorer on areas of high useage. Contains anti fungal agents and brings out the natural colour of the wood.Area of use For use above the waterline.
BLAKES THINNERS are blended to give the best results with regard to brushability and spray properties.Area of use Not relevant  
BLAKES THINNERS No 1    
BLAKES THINNERS No 2    
BLAKES THINNERS No 3    
BLAKES THINNERS No 5    
BLAKES THINNERS No 6    
BLAKES TIGER XTRA antifouling is a high strength erodible antifouling which gives excellent protection against fouling under all conditions due to its improved performance system.Area of use For use below the waterline.
BLAKES TIGER XTRA white antifouling is a high strength erodible antifouling which gives excellent portection against fouling under all conditions due to its improved perfromance system.Area of use For use below the waterline.
BLAKES UNDERWATER PRIMER is an underwater primer with excellent waterproofing properties, for use on all substrates. Also as a tiecoat that can be used between antifouling and hull primer systems, and between and existing antifouling and a new antifouling.Area of use For use below the waterline
BLAKES UNIFILLER is a quick drying styrene alkyd based filler. Can be overcoated with one and two component paints.Area of use Above the waterline
BLAKES 1314 HEMPEL'S UNI-PRIMER 13140 is a quick-drying, one-component, modified epoxy ester primer with zinc phosphate rust-inhibiting pigments.Area of use As a versatile primer on steel and metal surfaces for HEMPALIN or HEMPATEX in mild to medium corrosive atmospheric environment. It provides the possibility of reducing the number of primers for maintenance.  
BLAKES WATERLINE is a medium strength scrubbable antifouling especially designed for boottops and aluminium outdrives.Area of use For use below the waterline
BLAKES WOODSEAL is a clear moisture cured, one component polyurethane sealer. It is a high penetrating, clear, rot inhibiting sealer which is the best start to a new varnish or paint system on bare wood. May also be used on other porous surfaces.Area of use Above the waterline and below the waterline
       
Bookmark and Share