Skippers Fillers and antiskid particles

Boatpaint.co.uk Shop | Skippers | Skippers Fillers and antiskid particles

Skippers Polystuk - polyester filler

Skippers Polystuk - polyester filler 250ml

£11.22

Quantity:

Skippers Polystuk - polyester filler 1.4Kg

£34.76

Quantity:

Skippers Sintofiller - Synthetic surfacing filler

One component synthetic surfacing filler Alkyd based one component filler providing good adhesion, good filling power and good sandpapering characteristics. Used on wood, metals (previously treated with suitable primer). Recommended for light surface levelling and to smooth and make even any irregular surface. It can be overcoated with any type of synthetic paint suitable for wood and metals. SINTOFILLER is widely used for surface levelling of boats in one component coating systems and also in the wood industry and in the do-it-yourself field to fill up holes, small craters and any surface irregularity. SINTOFILLER makes all surfaces perfectly smooth and even before painting.

APPLICATION: by spatula, ready for; DRYING TIMES: touch dry: 1 hour; recoat time: after 24 hours SANDPAPERING: after 24 hours TH.COVERAGE: 5 m2/Lt for 120 dry microns

Skippers Sintofiller - Synthetic surfacing filler 500ml £17.84

Quantity:

Skippers Sintofiller - Synthetic surfacing filler 2.5Lt £72.00

Quantity:

Skippers Epoxy Light Filler

Two component light weight epoxy filler Two-component light epoxy filler for high thickness surface levelling on steel, aluminium and light alloy boats and on concrete surfaces. This filler is very flexible and can be applied in a single coat. Its low specific gravity formulation allows to limit the product load onto the coated substrate. Widely used in the boatyard industry.

MISCELA A+B: 1 parte di Sol. A con 1 parte di Sol. B in volume POT LIFE A+B: 1 hour; COLOUR A+B: Grey APPLICATION BYSPATOLA: Ready for use (or max. 5% Thinner 765) TOOL CLEANING: Epoxy Thinner 765 DRYING TIMES: touch dry: 3-4 hours; recoat time: after 24 hours SANDPAPERING: after 24 hours TH.COVERAGE: 2 m2/Lt for 500 dry microns

Skippers Epoxy Light Filler 1 Litre £51.70

Quantity:

Skippers Epoxy Light Filler 5 Litre £204.00

Quantity:

Skippers Plamur Finisher

Two component epoxy filler for surface levelling Two-component epoxy filler for high thickness levelling on small and large surfaces of boats. Used in two-component coating systems.

MIXING RATIO A+B: 1 part Sol. A with 1 part Sol. B by volume POT LIFE A+B: 1 hour at 20°C.; COLOUR A+B: Grey APPLICATION: by spatula, ready for use TOOL CLEANING: Use Epoxy Thinner 765 DRYING TIMES: touch dry: 6-8 hours; recoat time: after 24 hours SANDPAPERING': 18-24 hours TH.COVERAGE: 2 m2/Lt for 500 dry microns

Skippers Plamur Finisher - surface leveler 1 litre £48.26

Quantity:

Skippers Antiskid Beads - Glass antiskid beads

Antiskid glass beads Antiskid beads floating in the paint film in which they are added to give a hard wearing non-abrasive surface. ANTISKID beads can be added to any type of paint, one or two-component type, clear or coloured. They can be applied also by sieving them over the freshly applied film of varnish.

COLOUR: Clear APPLICATION: Add 20-30% by weight