Epifanes Clear Gloss Varnish
High quality marine varnish. This varnish is manufactured with a long base of 100% tung oil combined with non-yellowing urethane and alkyd resistant resins blended with a perfected balance of ultra violet filters. World famous for its high gloss retention, long lasting properties, unique flowing characteristics and high build capacity. Regarded by many as the finest of all yacht varnishes.
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
Epifanes Rubbed Effect Interior Varnish
For a rich satin lustre, for use preferably on interior work. A quick drying, clear, one-part, satin finish based on poly-urethane alkyds. This iterior finish gives optimum protection against alchol and chemicals. Apply as a finishing coat over several coats of Epifanes Clear Gloss Varnish.
|
|
|
|
|
|
|
|
|
|
|
Epifanes Wood Finish Varnish
Was Teak and Tropical Varnish.
Formulated to give excellent adhesion to new teak and other exotic woods with extraordinary protection, even in tropical climates. For use where a glossy, varnished look is desired in exterior and interior conditions. Provides a hard, clear, high gloss finish that looks like conventional varnish without much of the sanding and expertise required of varnish formulation.
|
|
|
|
|
|
|
|
Epifanes PP Varnish Extra
A hard, two-component build up varnish with excellent filling properties based on alkyd resin and isocyanate.
Excellent resistance to scratching, water, alcohol and houshold chemicals.
For use as a quick drying build up coat, as a sealer in a one- component and two-component synthetic or polyester based varnish system or, as an isolating sealer for oil and vapourous woods such as teak and iroco.
Additionally can be used as an interior finish on any wood type i.e cabinet doors galley furniture, interior trim etc.
Ideally suited as a maintenance coat over existing , intact, clear, two-component intertior varnish systems.
For exterior use , over coating with a minimum of three coats of Epifanes Clear Gloss Varnish ( one-component) or three coats of Epifanes Poly-urethane Clear Gloss (two-component) is required to provide UV-protection.
Mixing ratio is 1:1 by volume. Potlife after mixing 8 hours at 20 C . Temperature should be between 15 C and 27 C during application.
Thinner: All applications - Epifanes Thinner for PP Varnish Extra.
Recoatable: After 24 hours at 18C
Brush wet-on-wet after 5hours at 18 C
Spray wet-on-wet after 2.5 hours at 18 C
Coverage 2 litres is sufficent for 28 sq m
|
|
|
|
|
Epifanes Polyurethane Clear Satin
Produces the extra hardness and durability of a two-part aliphatic urethane based formulation with a subtle satin finish. For all interior wood. Excellent for use on cabin soles or salon tables. Package includes base & reactor. Thinning with Polyurethane Thinner For Brush or Polyurethane Thinner For Spray is required for application.
|
|
|
|
|
Epifanes Polyurethane Clear Gloss
Extraordinary hardness and a deep clear gloss with built in U.V. protection for extended freedom from maintenance. Package includes base & reactor. Thinning with Polyurethane Thinner For Brush or Polyurethane Thinner For Spray is required for application.
|
|
|
|
|
|
|
|
Semi-gloss, No Sand, Excellent Clear Coating for One-component clear wood finish based on modified alkyd/urethane resin. U.V. protecting.
Epifanes Rapidclear, providing exellent protection in all climates is the answer for a quick and easy alternative to conventional varnish. No sanding between coats.
|
|
|
|
|
Epifanes Rapidcoat
£13.02
Epifanes Rapidcoat for long-term protection and enhancement of all marine and household woods. Interior and exterior wood above the waterline. Rapidcoat can be used for renewing weathered areas, as a stain prior to a varnish system or as a full system for those requiring the absolute best in a quick and easy satin finish with maximum durability, UV protection and longevity.
|
|
|
|
|
Epifanes Wood finish Matt
Exterior protection in a matte finish. A finish coat over
Wood Finish Gloss. Beautiful, satin sheen with U.V.
protection for interior or exterior use..
|
|
|
|
|
