| |
| |
Acriglass UV,Poliglass,Space Clear UV,Verilux,Polimat, Polisatin
|
| |
One Component Skipper Gloss, Skipper Satin, Bilge Paint, Am-Lack
Skipper Sintolin - High quality synthetic enamel - this can be colour matched to your choice!
|
Two Component Acriglass Enamel, Space Top, Whitext Bucciatto
|
Sottofondo Nautica - undercoat for wood and steel
Sintofast Primer - Fast Drying primer
Solver Primer - Intermediate Undercoat
Unifiber Primer - One component fibreglass primer
Epozinc1C -One component zinc rich epoxy primer
Eliprimer -Special one-component primer for propellers
Anticorrosive Primer - for steel and wood * This product is only available while stocks last
Cromomimio 95AT - Anticorrosive basecoat
Clorofond AT - Deck Paint
|
Polifiber Primer - Primer for fibreglass
Polifond - Polyurethane white undercoat
Epofond AM9 - Epoxy primer Undercoat
Epozinc 2C -Two pack Epoxy Zinc Rich Coating
Amtar 44 Primer - Epoxy Tar Primer
Epofond AM9 H.B. - Water based epoxy primer
Eposealer 97- Anti-osmosis coating
Epofond AM90 W.B. - Water based epoxy primer
|
Polistuk - Polyester Filler
Sintofiller - Synthetic surfacing filler
Epoxy Light Filler - Two-Pack Light Epoxy filler
Plamur Finisher - Surfacing Leveling filler
Antiskid Beads - Glass antiskid beads
|
For one-component paints: 107 - 109 - 900 - 700 - 400 - 600
For two-component paints: 765 - 203 - 205 - 201
Thinners included in the Skipper’s marine range are specifically formulated and balanced for use with Skipper’s marine paints.
All Skipper’s products must be diluted necessarily and exclusively with Skipper’s Thinners recommended on the directions of use on each can or specified in the relevant product data sheets.
The use of other thinners not specified in their technical information may affect the final result of our products.
The Skipper’s thinners are exclusively obtained with high quality solvent blends.
Sveringraf - solvent based paint remover
Stripcarena - water thinnable antifouling remover
|
Space Top Line additives have been formulated to help the application of SPACE TOP ENAMEL and SPACE CLEAR UV VARNISH in particular application and weather conditions, by overstepping those inconveniences that can usually be encountered in certain unfavourable circumstances, such as humidity, high temperature, etc.
In consideration of the particularity of these additives we however recommend that technical advice should always be sought.
Spacefast - Drying additive
Space BP - Anti-bubble additive
Space HP - Anti-moisture additive
Space SP - Anti-silicone additive
Redilfast - Accelerating additive
|
