Awlgrip Topcoat Reducers T0001 Spray applied Urethane Topcoats
T0001 - Fast - fast evaporating for Spray applied Urethane Topcoats,
Use T0001 in AWLGRIP®/AWLCRAFT® 2000 Topcoats when application and cure temperatures are between 60°F to 70°F (16°C to 21°C) and 80°F to 90°F (27°C to 32°C).
|
 |
|
|
|
|
|
|
Awlgrip T0002 Fast Evaporating Reducer and Cleaner
T0002 Fast Evaporating Reducer and Equipment Cleaner
Use T0002 in AWLGRIP®/AWLCRAFT® 2000 Topcoats when application and cure temperatures are between 55°F to 65°F (13°C to 18°C) and at temperatures above 85°F (29°C).
|
|
|
|
|
Awlgrip T0003 Standard Reducer for Spray Applied Urethane Topcoats
T0003 Standard Reducer for Spray Applied Urethane Topcoats
Use T0003 in AWLGRIP®/AWLCRAFT® 2000 Topcoats when application and cure temperatures are between 70°F to 85°F (21°C to 29°C).
|
|
|
|
|
|
|
|
Awlgrip T0005 Hot Weather Reducer
T0005 Hot Weather Reducer for Urethane Topcoats
Use T0005 in AWLGRIP®/AWLCRAFT® 2000 Topcoats when application and cure temperatures are above 85°F (29°C).
T0005 is most often used as an additive, blended with other spray reducers to improve flow.
T0005 is seldom the sole reducer.
|
|
|
|
|
Awlgrip T0101 Gold Label Antifoul Reducer
T0101 AWLSTAR GOLD LABEL Anti-Fouling
T0101 is specially formulated for spray and brush/roll applications of AWLSTARTM GOLD LABEL Anti-Fouling. It should not be used in urethane or epoxy coatings.
|
|
|
|
|
Awlgrip AwlBrite Plus Reducer
Activator/Reducer for AWL-BRITE® PLUS J3005/J3006/A0031
A0031 is a special blend of solvents and additives which is a required part of the AWL-BRITE® PLUS mix.
A0031 contains additives which stabilize the pot life of the mixture and initiate cure of the product..
|
|
|
|
|
|
|
|
Awlgrip T006 Standard Reducer for Epoxy Primers
T0006 Standard epoxy reducer for spray application of 545 Primer, AWL-QUIK®, Sprayable Fairing Compound, 30-Y-94TM, and High Build Epoxy Primer.
Also used to brush or roll HULL-GARD®, for conventional spray and brush applications of HULL-GARD® W.B.
|
|
|
|
|
|
|
|
Awlgrip T0031Slow Drying Reducer Primer and Topcoat (Non-Spray)
T0031 Brushing reducer to be used when brushing or rolling 545 Primer or AWL-QUIK® Primer.T0031
Brushing Reducer for Epoxy Primers and Urethane Topcoats.
Use T0031 in AWLGRIP® Topcoats, 545 Primer, and AWL-QUIK® Sanding Surfacer in brush/roller applications.
T0031 evaporates very slowly, keeping the paint film open, maximizing flow and leveling while minimizing brush marks and roller stipple.
For AWLGRIP® Topcoats, add T0031 at 10 to 35% of the total volume of the mixed color base and converter.
Application and cure temperatures between 60°F and 90°F (16°C and 32°C) produce the best results, with 70°F to 85°F (21°C to 29°C) being the optimum.
T0031 is not recommended for use in spray applications. If a retarder reducer is needed for spray application, T0005 should be used.
|
|
|
|
|
|
|
|
Awlgrip T0073 Ultra Build Reducer
T0073 Special reducer for ULTRA-BUILD® Primer (D8008-D3018).
|
|
|
|
|
