Skippers Sottofondo Nautica
One component white undercoat. Alkyd based white undercoat specially formulated for application on wood and steel surfaces exposed to marine environment. It is used for the preparation of superstructures of boats and it can be overcoated with one-component topcoat finish (e.g. Skipper enamel). COLOUR: white<br> APPLICATION: Brush, Roller, Spray<br> DILUTION: brush, roller: 10-20% Thinner 107; spray: 20-30% Thinner 900<br> DRYING TIMES: touch dry: 3-4 hours; recoat time: 18-24 hours<br> TH.COVERAGE: 9-10 m2/Lt or Kg a 40-50 dry microns<br>
|
 |
|
|
|
|
|
|
Skippers Sintofast Primer - In the process of being phased out
Fast-drying one component intermediate undercoat Fast drying intermediate undercoat for interior and exterior coating of steel and wooden boats. Provides a good anchor pattern and can be easily sandpapered. After 48 hours drying can be also overcoated by two-component polyurethane topcoats (e.g.ACRIGLASS ENAMEL or SPACE TOP). APPLICATION: Brush, Roller, Spray DILUTION: brush, roller: 10-20% with Thinner 700; spray:15-30% Thinner 900 DRYING TIMES: touch dry: 1-2 hours; recoat time: 16-24 hours TH.COVERAGE: 10-12 m2/Lt for 40-50 dry micronsi
|
|
|
|
|
Chlorinated rubber-based intermediate one-component undercoat
Primer and intermediate undercoat based on chlorinated rubber, formulated with aluminium and rust inhibitor pigments. Applied as a keying coating between old and new antifoulings or in anticorrosive coating systems. Provides outstanding resistance in marine and industrial environment. Recommended on metal structures exposed in marine environment.
APPLICATION: Brush, Roller, Spray
DILUTION: brush, roller: 10-25% Thinner 700; spray:15-30% Thinner 700
DRYING TIMES: touch dry: 2-3 hours; recoat time: min. 6 hours
TH.COVERAGE: 4-6 m2/Lt for 60-70 dry microns
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One component zinc rich epoxy primer
One-component zinc-rich epoxy based coating providing easier application than two-pack products of this kind; it is used in the small carpentry industry and where a high quality anti-corrosive protection may be required. Also recommended as a maintenance coat for hot-galvanizing or touch ups on two-component products.
APPLICATION: Brush, Roller (small surfaces)
DILUTION: brush, roller: 5-10% Thinner 700; spray:5-10% Thinner 700
DRYING TIMES: dust dry: 15-30 minutes; recoat time: 12-24 hours
TH.COVERAGE: 4-5 m2/Lt for 50 dry microns
|
|
|
|
|
|
|
|
Special one-component primer for propellers
One-component primer based on synthetic resin formulated for direct application on non-ferrous material such as brass, aluminium or light alloys. It can be overcoated with one component products and particularly with all types of antifoulings (e.g. ELIFAX).
APPLICATION: Brush, Rolelr, Spray
DILUTION: brush, roller: 5-10% Thinner 765; spray: 5-10% Thinner 765
DRYING TIMES: 20 minutes; recoat time: min. 12 ore
TH.COVERAGE: 10 m2/Lt for 20 dry microns
|
|
|
|
|
Alkyd based one-component anticorrosive primer
General purpose anticorrosive one component paint formulated with high content of rust inhibitor pigments which give to the product good anti-corrosion and anti-decay characteristics. Recom-mended in synthetic coating system for long lasting corrosion protection. Easy to apply and fast drying, CROMOMINIO-AT provides a good anchor pattern and high coverage. Widely used in the building, carpentry and boatyard industries.
APPLICATION: brush, roller, spray
DILUTION: brush, roller: 15-25% Thinner 107; spray:15-30% Thinner 107
DRYING TIMES: touch dry: 2-3 hours; recoat time: 24 hours
TH.COVERAGE: 7-9 m2/Lt or 4-5 2/Kg for 40-50 dry microns
|
|
|
|
|
|
|
|
Skippers Idrodrop -anti condensation water based paint
IDRODROP which is a anti condensation water based paint for interior and is suitable to withstand mould growth this product also provides thermo-insulating charaterictics and sound proofing at a thickness of 2000 microns.
Idrodrop is only produced in white and comes in a matt finish and has a cover of 0,7m2 per litre applied at 500 microns. and comes in 4L tins. If the paint is to be applied over polyester or epoxies resin and matt it is recommended to use a suitable primer before appliction for example unifiber.
Colour: White
APPLICATION:
DILUTION:
DRYING TIMES:
TH.COVERAGE: 0,7m2 per litre applied at 500 microns
PACK SIZE: 4 LT
|
|
|
|
|
