International Varnishes and Woodcare Products

Replaces Perfection Varnish.

Used as a varnish, Perfection Plus has a service life of up to four times longer than conventional one-part varnish products and provides superior UV protection. The product can be applied direct to substrate, even onto oily woods such as teak and iroko. It has an exceptional gloss finish, both on application and in service, providing the ultimate in longlasting aesthetic results.

Perfection Plus can also be used as a glazecoat with the pigmented Perfection range. This will enhance the durability of the finish and further improve colour retention. Using Perfection Plus with Perfection finish will deliver superior flow and levelling characteristics, whilst maintaining gloss and DOI levels.

Preparation:

PREVIOUSLY PAINTED SURFACES:

In Good Condition: Wash down with Super Cleaner, rinse with fresh water and allow to dry. Abrade with 320-400 grade (grit) paper.

In Poor Condition: Remove all previous coatings and prime the substrate.

BARE WOOD: Sand smooth with 120 grade paper, followed by 240 and finally 320 grade paper. Remove sanding dust by brushing, dusting and wiping. If wiping with solvent then allow to dry completely before applying the first coat. Prime, if required, with International's Clear Wood Sealer Standard (Polygrond) and Clear Wood Sealer Fast Dry.

If Clear Wood Sealer has been omitted thin the first coat by 20-25% with Thinner No.9.

OILY WOODS e.g. Teak: Must be adequately degreased (Thinners No.9 is recommended) and prepared prior to application of Perfection Plus. Please ensure the surface is completely dry before applying the first coat.Prime, if required, with International's Clear Wood Sealer Standard (Polygrond) and Clear Wood Sealer Fast Dry.

If Clear Wood Sealer has been omitted thin the first coat by 20-25% with Thinner No.9.

Advanced UV technology, high gloss yacht varnish with a traditional amber hue that enhances the colour of natural wood. The exceptional deep gloss and colour are retained over the lifetime of the coating.

* An optimised blend of UV absorbers, HALS and resins in our longest-lasting one-part varnish

* Higher-build, reduced work-time formulation with a more bodied feel and superior self-levelling qualities

* Achieve a professional finish in 4-6 coats; sanding after every second coat

* Suitable for all internal and external woods, including oily timbers such as Teak and Iroko

Thinner Brush - YTA800 Thinner No. 1. Spray - YTA085 Thinner No. 3.







Related products:

1. International Thinners No.1- 1 Litre

2. International Thinners No.3 - 1 Litre

Related products:

1. International No1 Thinner

Related products:

1. International No1 Thinner

Compass, a fast-drying, highly durable one- part polyurethane gloss varnish, allows you to reduce your work time and labour efficiency, without compromising on aesthetics or protection. Apply two coats per day – the fast-dry formulation minimises dust contamination – and sand only after every 2nd or 3rd coat. Super flow and application characteristics ensure a professional, long-lasting finish that will deliver maximum resistance to abrasion, chemical, water and alcohol spills. Compass is ‘light amber’ in colour, to emphasise the colour and appearance of natural wood. Contains HALS and UV absorbers for superior UV resistance







Related products:

1. International No1 Thinners

Clear Wood Sealer Fast Dry is a quick-drying, high-build, clear, two-part polyurethane primer for use before varnishing or painting. Clear Wood Sealer Fast Dry penetrates deep into wood, sealing the substrate and filling the grain to provide a smooth, impact, scratch and wear-resistant surface ready for overcoating. Fast-drying properties enable the application of up to 4 coats in one day. Clear Wood Sealer Fast Dry can be used under International one and two-part varnishes and finishes to reduce overall work-time, increase durability and improve final aesthetics.

The replacement for Ceetol Marine!

Woodskin is a flexible wood oil/varnish hybrid that acts like a skin for your wood. Microporous properties allow Woodskin to breathe with your wood; tiny holes let the paint film expand and contract but are small enough to repel water the cause of mould and mildew. Woodskin is very easy to apply; no need to thin or sand between coats. With good flow and levelling, Woodskin dries to a subtle, translucent sheen. Woodskin penetrates deep into your wood, leaving a thin surface film that will not crack or flake. Minimal maintenance requirements simply clean and reapply season after season the Natural Teak colour of Woodskin will showcase the beauty of any wood. Woodskin is suitable for use on all types of wood, including oily woods such as teak and iroko