Skippers Polystuk - polyester filler
|
|
|
 |
|
|
|
|
|
|
Skippers Sintofiller - Synthetic surfacing filler
One component synthetic surfacing filler
Alkyd based one component filler providing good adhesion, good filling power and good sandpapering characteristics. Used on wood, metals (previously treated with suitable primer). Recommended for light surface levelling and to smooth and make even any irregular surface. It can be overcoated with any type of synthetic paint suitable for wood and metals. SINTOFILLER is widely used for surface levelling of boats in one component coating systems and also in the wood industry and in the do-it-yourself field to fill up holes, small craters and any surface irregularity. SINTOFILLER makes all surfaces perfectly smooth and even before painting.
APPLICATION: by spatula, ready for;
DRYING TIMES: touch dry: 1 hour; recoat time: after 24 hours
SANDPAPERING: after 24 hours
TH.COVERAGE: 5 m2/Lt for 120 dry microns
|
|
|
|
|
|
|
|
Skippers Epoxy Light Filler
Two component light weight epoxy filler
Two-component light epoxy filler for high thickness surface levelling on steel, aluminium and light alloy boats and on concrete surfaces. This filler is very flexible and can be applied in a single coat. Its low specific gravity formulation allows to limit the product load onto the coated substrate. Widely used in the boatyard industry.
MISCELA A+B: 1 parte di Sol. A con 1 parte di Sol. B in volume
POT LIFE A+B: 1 hour; COLOUR A+B: Grey
APPLICATION BYSPATOLA: Ready for use (or max. 5% Thinner 765)
TOOL CLEANING: Epoxy Thinner 765
DRYING TIMES: touch dry: 3-4 hours; recoat time: after 24 hours
SANDPAPERING: after 24 hours
TH.COVERAGE: 2 m2/Lt for 500 dry microns
|
|
|
|
|
|
|
|
Skippers Plamur Finisher - surface leveler 1 litre
Two component epoxy filler for surface levelling
Two-component epoxy filler for high thickness levelling on small and large surfaces of boats. Used in two-component coating systems.
MIXING RATIO A+B: 1 part Sol. A with 1 part Sol. B by volume
POT LIFE A+B: 1 hour at 20°C.; COLOUR A+B: Grey
APPLICATION: by spatula, ready for use
TOOL CLEANING: Use Epoxy Thinner 765
DRYING TIMES: touch dry: 6-8 hours; recoat time: after 24 hours
SANDPAPERING': 18-24 hours
TH.COVERAGE: 2 m2/Lt for 500 dry microns
|
|
|
|
|
Skippers Antiskid Beads - Glass antiskid beads
Antiskid glass beads
Antiskid beads floating in the paint film in which they are added to give a hard wearing non-abrasive surface. ANTISKID beads can be added to any type of paint, one or two-component type, clear or coloured. They can be applied also by sieving them over the freshly applied film of varnish.
COLOUR: Clear
APPLICATION: Add 20-30% by weight
|
|
|
|
|
|
|
|
|
|
|
